Hony Sleeve Stat

  • antistatic sleeve
    antistatic sleeve
  • hardness 75 ShD
    hardness 75 ShD
  • HD print level
    HD print level
  • humidity resistant
    humidity resistant
  • manual handling
    manual handling
  • more productivity
    more productivity
  • protection ring
    protection ring
  • solvent resistant
    solvent resistant

Anti-static, plate mounting sleeve with external Everstat polyurethane coating for use with double-sided adhesive cushion tapes. The intermediate layer between the base sleeve and the outer coating is made of Honeycomb; its very low density enables a reduction in sleeve weight up to 70% if compared to a traditional sleeve of equal dimensions. The mechanical characteristics of the Honeycomb guarantee a reduction/absorption of typical stroke vibrations in flexographic printing. Made of conductive materials in compliance with work safety standards published by the “PTB” (Physikalisch-Technische Bundesanstalt - Germany) for flexographic printing presses.

Sleeve totally encapsulated in fibreglass with special Everstat polyurethane outer coating. The fibreglass side flanges guarantee total resistance against humidity and solvent penetration. The intermediate layer is made of Honeycomb, material used in the aeronautical industry with a very low density and high structural strength.

Max Diameter
700 [mm] // 27.559"
Min / Max Length - Tolerance UNI:ISO 2768T1m
350 - 2.850 [mm] // 13.78" - 112.205"
14 - 70 [mm] // 0.551" - 2.756"
Surface hardness
75 Shore D
Electrical resistance
<1 MOhm
Compressed air for sleeve assembly
6 - 10 [bar] // 87 - 145 PSI Minimum capacity: 700 [l//min] with air input having a free passage with D => 8[mm]
Operating temperature
18° - 40 °C // 64,4 - 104 °F
Register notch
rotection ring in polyurethane with integrated notch.
Standard reference guidelines
1 longitudinal corresponding to the register notch – 1 circumferential in centre
Working tolerance
External finishing with precision grinding (Ra=0.8) with T.I.R. < 0.02 mm] when measured on a mandrel with T.I.R. <= 0.005 [mm]
Cleaning and Storage
Use ethanol with an additional max 20% of ethyl acetate; store vertically