Blanket mounting sleeve for use on roto-offset presses with variable printing (range 14" - 32"). The sleeve is totally encapsulated in fibreglass with an external layer of special polyuretane PU Everstat over the external surface in made and horizontal line as a reference for the blanket mounting. The protection steel ring integrates the register notch.
Fiberglass sleeve made with 2 different intermediate layers, which are ultra-light for manual movement. Outer coating in PU Everstat.
Colour
Black (PU Everstat)
Min/Max Printing repeat
14" - 32"
Min/Max Length - Tolerance UNI:ISO 2768T1m
400 - 1000 [mm] // 15.748" - 39.37"
Register notch
Protection steel ring with integrated register notch
Surface hardness - Tolerance +/-5 Shore D
75 Shore D PU Everstat
Compressed air for sleeve assembly
6 - 10 [bar] // 87 - 145 PSI Minimum capacity: 700 [l//min] with air input having a free passage with D => 8[mm]
Operating temperature
18° - 40 °C // 64,4 - 104 °F
Working tolerance
External finishing with precision grinding (Ra=0.8) with T.I.R. < 0.02 [mm] when measured on a mandrel with T.I.R. <= 0.005 [mm]
Cleaning and Storage
Use ethanol with an additional max 20% of ethyl acetate; store vertically
